Go Back   getDare Truth or Dare > Truth OR Dare > Request TORD Online

Closed Thread
 
Thread Tools Display Modes
Old 11-02-2010, 03:27 AM   #1
hot_sarah
Account Banned
 
hot_sarah's Avatar
 
Join Date: Mar 2010
Posts: 102
Default

how much air could one take? where would i get one and could it burst?
hot_sarah is offline  
Old 11-02-2010, 03:55 AM   #2
b0ris
Senior Member
 
b0ris's Avatar
 
Join Date: Jan 2010
Location: too small a vilage (see signature)
Posts: 218
Default

Quote:
Originally Posted by hot_sarah View Post
how much air could one take?
Quite a lot. "Bloating" is the term used for people pumping up their bellies with air. Memories for Life said to use 8 inches, so it will be much like an 8 inch dildo. It can't get larger inside of you then outside: test how big it gets after 60 pumps (maximum for the dare) and 30 pumps (theoretical average).
Quote:
where would i get one and could it burst?
If the test hasn't blown it to pieces, then you're probably safe.
Any shop that sells bikes will sell tubes as well. But maybe you can find a punctured tire: if the hole is far enough from the valve you've got your toy for free.
If you don't want to cut up a tire, you might try using a whole tire, for small wheel (childs bike): fold it in two at the valve... Might be much harder to get inside though.

Really good dare Memories for Life!
__________________
I live in the most hilarious "country" in the world: http://vimeo.com/15239617
b0ris is offline  
Old 11-02-2010, 06:53 PM   #3
Memories for Life
getDare Devil
 
Memories for Life's Avatar
 
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 1,012
Default

Quote:
Originally Posted by hot_sarah View Post
how much air could one take? where would i get one and could it burst?
If you get one from a standard bike, you should be okay since those have a thicker skin than a racing bike tire. Those are meant to be replaced after one use! The weak point is how well you seal up the ends -- if the ends aren't airtight then they may fail unexpectedly when under inflation. A sudden rush of air up in your colon might have odd effects on your body.

To be safe, do a test run once you got it constructed. Don't be surprised that the inflated "toy" looks daunting when it's visible and could cause you doubts on completing the dare!
Memories for Life is offline  
Old 11-02-2010, 07:51 PM   #4
rahamn
Senior Member
 
rahamn's Avatar
 
Join Date: Sep 2008
Location: Texas retired now
Posts: 167
Send a message via Yahoo to rahamn
Default

Quote:
Originally Posted by Memories for Life View Post
If you get one from a standard bike, you should be okay since those have a thicker skin than a racing bike tire. Those are meant to be replaced after one use! The weak point is how well you seal up the ends -- if the ends aren't airtight then they may fail unexpectedly when under inflation. A sudden rush of air up in your colon might have odd effects on your body.

To be safe, do a test run once you got it constructed. Don't be surprised that the inflated "toy" looks daunting when it's visible and could cause you doubts on completing the dare!
Just an idea but maybe try some superglue to seal the ends. It may work better also you may want to cut it either diagonally or to a point on the end going in. hope it works well and let us know what happens!!
rahamn is offline  
Old 11-02-2010, 08:52 PM   #5
kurious
Senior Member
 
kurious's Avatar
 
Join Date: Oct 2010
Location: Canada!
Posts: 130
Default

For the Bathroom, with you computer

Put the shower hose up your ass, but make sure you are in a position you will be comfortable in for a while. Turn the water on, but only a little bit so it is trickling into you ass. Then, watch a movie or some porn on your computer, as the water slowly fills you up. You have to watch at least 1.5 hr's before you can turn off the water. If you last the 1.5 hr's, you can cum, but expel that water as you cum. If you have to stop before then, you must Not cum, and try again. You cannot cum until you last the whole time!

Have fun, and let me know how it goes.
kurious is offline  
Old 11-03-2010, 04:41 PM   #6
Memories for Life
getDare Devil
 
Memories for Life's Avatar
 
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 1,012
Default

Quote:
Originally Posted by rahamn View Post
Just an idea but maybe try some superglue to seal the ends. It may work better also you may want to cut it either diagonally or to a point on the end going in. hope it works well and let us know what happens!!
The ones I've created were first knotted on the ends resembling a sausage casing end. I put a vinyl cinch tie after the knot, pulling tight with pliers. I trimmed the end as close to the knot as possible and covered the end with rubber contact cement, the kind you use to repair hole in bicycle tubes!
Memories for Life is offline  
Closed Thread

Advertisements
Kink Talk


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:45 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc. - Also check out Kink Talk!reptilelaborer