DIY bdsm

[sir sam]

Originally Posted by Sub.lucy

Hahaha if you even think it is mean... It must be very bad indeed

Damn,... No fears...... You know me too well.

[little pet]

Ive been intrigued by those head boxes they use on insex for a long time.


Something about just shutting the lid close, shoving a gag in and hiding the face is just so humiliating. It totally objectifies the body as a set of tits and holes to use at the Dom's leisure. I've been thinking about making one for myself. Blindfolds and such don't work when you have online sessions, but this just might. While having to type, I could open the lid that I would make in front of the eyes. I could make a hole for my mouth, that a gag or dildo would fit through. When having corner time, I could shut the lid closed and be left in total darkness and isolation, the rest of my body on display.

I'm not going to make one out of wood, that is just too much of an effort since I don't even know if my owner will like this idea. But I do have some very sturdy, thick cardboard and a glue gun lying around. I could make it even heavier by doubling up the layers of cardboard. Maybe some fabric to really finish it off.

This idea is caused by a lot of horniness and the desire to just create cool new stuff. I'll post my progress here.

[Jaro]

An artist like you is bound (pardon my pun) to succeed!
And I'm sure your horniness acts like a great catalyst for it.
You shall succeed and have your head in a box in no time!

[sir sam]

Just want to say that i like the idea a lot.
It will make storing you away a lot easier.

I will likely decorate your nipples because that is really much more fun.

Note,
And now you're in diy mode.... Insex inspired... Can you do a nose-hook as well?

[little pet]

Originally Posted by Jaroface

An artist like you is bound (pardon my pun) to succeed!
And I'm sure your horniness acts like a great catalyst for it.
You shall succeed and have your head in a box in no time!

thanks, I'm already making a lot of progress. The box itself is finished. Now I just have to decide how to close the flaps that go around my neck.

Then, I'll cover it in fabric. I have some lying around. It has cute flowers on it, but alas, that's all I got at the moment.

[little pet]

Originally Posted by sir sam

Just want to say that i like the idea a lot.
It will make storing you away a lot easier.

I will likely decorate your nipples because that is really much more fun.

Note,
And now you're in diy mode.... Insex inspired... Can you do a nose-hook as well?

Hmm decorated nipples are always nice .

Oh and a nose hook... god, that's really very humiliating. It would make me feel like miss piggy to wear one! I do happen to have some thick wire that might come in handy though...

[little pet]

A little update; the box is coming along nicely. It was already the right size and it fits my head perfectly.

-I cut a hole in he front, at mouth height. I had an empty chewing gum bottle
sitting on my desk and it gave me an idea to nicely finish the hole I'd cut in the box.
-I cut off the top of the bottle and glued it into the hole. I cut the lid of the bottle loose and I intend to attach that to the box with a small chain so that I don't lose it when I keep the lid off. I painted it a nice slutty red colour :-).
-I attached two rings to the sides of the box at my owner's request. In case he'd like to securely store me away.
-I made a little hatch at eye level that closes tight, with two magnets I happened to have.

Now all that is left is to cover the whole thing in fabric. I'm halfway with that but we decided that a test run was in order.

It was sooo great. Sir left me sitting with my head stuck in there for half an hour (the box was attached to a rack that stores my painting equipment), saying he didn't want me to bother him. It's such a humiliating feeling; body on display, vulnerable, while not being able to see a thing. Stored away until I was needed again. The hatch closes very well with the magnet, and the bottom closes snugly around my neck so it was quite dark. No cracks to peek through so all I could do was wait.

We came upon a few things that need improving, so I was very glad with this test run. I'm very happy with the results so far.

When it's completely finished, I'll post a few pictures.

[little pet]

Well, I'm having a productive day today :-)

I made the nose hook Sir requested. It was a 2 minute job. I had some rubber covered metal wire, so that was the perfect material! I bent it in the right shape, having to measure a few times. Attached a string to an old belt loop I had in my sewing box and....voila! Ready to be tied to anything my owner likes.

I did try it on of course... it's quite uncomfortable. Not painful though. Well, not after 1 minute of wearing it at least. I took a look in the mirror too. Damn it's a humiliating thing. It completely distorts the face making me indeed look more like her...

...than myself.

Here are some pictures. I hope you're satisfied Sir.

[sir sam]

Truely truely satisfied...
It looks really nice.
You will look really......... Stupid.

[little pet]

Originally Posted by sir sam

Truely truely satisfied...
It looks really nice.
You will look really......... Stupid.

Well, Thanks. Ill take that as a compliment

[little pet]

And now, ladies and gentlemen... I present:

The Box







I realise I havent taken a picture with the hatch closed, but I guess you can imagining how that looks.

So, this is how it was made:

I used a cardboard box, a sharp knife (with which I cut one finger pretty badly in the process), a hot glue gun, 2 o rings, an old leather belt, Velcro, a plastic bubble gum bottle, paint and fabric to upholster the box.

1. I found a thick cardboard box that happened to be the right size. I could have made one to fit, but this saved me a lot of hassle.
2. I cut out a hatch at eye level.
3. Attached magnets to the hatch and the box itself so that it stays opened or shut.
4. Cut out a hole for the mouth.
5. Cut off the top of a chewing gum bottle and glued that into the mouth-hole.
6. Painted it a nice shade of slutty red.
7. Attached rings at the top of the box so that it can be attached to rope and such. I made holes at both sides and used a leather strip to fasten both rings to.
8. I attached two flaps at the bottom of the box, measured the diameter of my neck and cut out two half circles.
9. I upholstered the box with the prettiest flower print fabric I had lying around . You can still see the glue. It's needs to dry a little more.
10. Attached Velcro to the bottom flaps to really be able to close them around my neck.
11. Took an hour to wash all the glue off my hands.

This cost me exactly €0,- since I had all that stuff anyways. Well, I used some of it up, but I don't mind that at all. I had a lot of fun making it!

[sir sam]

And this...........
Is amazingly great!!!

The most funny thing i think is the strawberry print.
Knowing the robust and frightening look of the "insex" example the strawberries are really a statement .

Absolutely great.

Absolutely amazing.

And ready for a very long journey coming tuesday.

[Jaro]

Very nice work, that just looks excellent! Almost like the real deal.
I bet you can't wait to try it out?

Thank you for providing all the pictures. I think the first picture turned out particularly well!

[little pet]

Originally Posted by sir sam

And this...........
Is amazingly great!!!

The most funny thing i think is the strawberry print.
Knowing the robust and frightening look of the "insex" example the strawberries are really a statement .

Absolutely great.

Absolutely amazing.

And ready for a very long journey coming tuesday.

Thank you Sir. Yes the print is somewhat cute, compared to what the box is meant for. At least you'll have something pretty to look at when my face is hidden

[little pet]

Originally Posted by Jaroface

Very nice work, that just looks excellent! Almost like the real deal.
I bet you can't wait to try it out?

Thank you for providing all the pictures. I think the first picture turned out particularly well!

Haha, oh the bonus foot! I hadn't even noticed that it was in the picture! Well , it's nice that it's being enjoyed

You're right, I really can't wait. All this new stuff I've made has to wait until Tuesday. I'm not very good with patience.