[Wordsmith]

I did not buy the clone a willy set but alginate and silicone. It's basically the same as the clone a willy set but you can achieve better results. And you have more material if the first try fails.

There are different types of alginate, some types cure fast some slow. I did it with fast-curing alginate (3min cure time) and a 2l coke bottle with the bottom cut away. It's better to do it with a partner because mixing some stuff is not the sexiest thing to do and you could lose your erection. If you don't have a vacuum chamber make sure to pour the alginate gently on one spot to prevent bubbles. If you have a vacuum chamber you need alginate which cures slower, we don't want to cure it without the cock inside.

I must say that putting my dick in this cold stuff was not enjoyable, but I managed to stay hard without a cock ring. You can also use warm water, but this will make the alginate cure faster. When the mold is done you can relax, you have enough time now to mix the silicone. To prevent bubbles in the silicone make sure to mix both components slowly. Try to avoid that air being mixed in. Then pour it like the alginate on one spot, slowly but steadily. You may use a blowtorch on the liquid silicone but don't overdo it. This way the surface bubbles pop. Professionals let the silicone cure in a pressure chamber, but I think most people don't have such a thing.

My silicone toy came out great besides a small hole on the bottom side. If you have any questions or need tips, contact me or leave a reply here. I love to talk about craft stuff.

Edit: Oh my, I just clicked on the link and was shocked at how expensive this is. I paid 18.9€ for a huge bag of alginate, 29.9€ for 1kg of silicone, and a few bucks for the coke. I guess that I could make 4-6 cock toys with this material